BACKWASH NITRO RADIO CONTROLLED BUGGY 2.4GHZ

This is the great looking and even better performing HSP nitro radio controlled buggy. The buggy is extra tough and a good all rounder performing well both on road and off. The Backwash is feature packed making it one of the top spec buggies on the market and the .18 engine along with the automatic 2 speed gearbox makes it extremely quick. Please note there are two other cheaper versions of the HSP nitro buggy but this is the top of the range one that has the two speed gearbox and also the pivot ball suspension. These also have our Nitrotek upgrades on them such as the chrome finished wheels, SH engine, waterproof electronics and wheel type transmitter. The Backwash comes fully built with everything included apart from fuel, glow start (both optional extras on this page above) and 12 normal AA batteries.

The Nitrotek versions of this nitro radio controlled buggy have been upgraded with high quality SH engines. SH engines are renowned for their quality and power

Nitrotek have specified this Backwash so that it is kitted out with wheel type 2.4GHz controllers. These have many advantages over AM/FM transmitters:

Improved reliability due to less interference at this frequency range
Quicker more responsive control
Lower power consumption
Many models can drive together at once without need for checking frequencies and crystals etc

4 WHEEL DRIVE SYSTEM
This model has 4 wheel drive giving better grip for better handling. These hobby grade RC cars also feature working front and rear differentials that further improves handling.

SOLID ALUMINIUM CHASSIS
Strong chassis with countersunk screws for a flush surface.

IMPACT RESISTANT CHROME WHEELS
Wrapped with high traction all terrain tyres.

1:10 SCALE
The car measures 400mm x 160mm x 250mm (length, height, width).

ADJUSTABLE SUSPENSION SYSTEM
Adjustable aluminium capped oil-filled shocks are mounted to aluminium towers that allow you to adjust the angle and tension.

POWERFUL .18 NITRO ENGINE
SH 18 engine made in Taiwan to ensure the highest quality.

75cc FUEL TANK WITH SPLASH GUARD
Spend less time refueling and more time driving.

ENCLOSED RADIO BOX
Splash-proof receiver is stored in a sealed box to further protect the electronics from splashes and rain.

AUTOMATIC 2 SPEED GEARBOX
The two speed gearbox uses the first gear for quicker acceleration and the second gear for higher top speed. The speed at which it changes gear can be adjusted.

ALL NEW 2.4GHz RADIO TRANSMITTER
All new 2.4GHz radio technology is used. This is more reliable than the old FM equipment and allows multiple RC cars to be usd in the same area without interference.

FREE UK NEXT WORKING DAY DELIVERY

When you place your order before 2pm, Monday – Friday it will be posted the same day with a next day delivery courier. Delivery times exclude weekends. For example if you order after 2pm on Friday it will be posted on Monday and delivered on Tuesday. If you ordered after 2pm on Thursday it would be posted on Friday and delivered on Monday.

STI02 RTR RADIO CONTROLLED RC DRIFT CAR

1:10th SCALE MODEL
This 1:10th scale RC car measures in at 360mm x 200mm x 112mm (length, width, height)

WATERPROOF SERVO & RECEIVER
This model has a waterproof servo and receiver to help protect the model if you hit a puddle or are racing on a wet track.

POWERFUL MOTOR SYSTEM
A fast 540 motor connected to an electronic speed control that gives full proportional speed both in forward and reverse.

OIL FILLED SHOCKS
The angle of the aluminium capped shocks can be adjusted to suit your driving preference and terrain.

ALUMINIUM CENTRAL DRIVE SHAFT AND UPPER CHASSIS
This model comes with a strong aluminium central drive shaft that transfers the power from the rear to the front for the 4WD system. The aluminium upper chassis keeps the chassis from flexing for improved handling.

DRIFTING TYRES
The car comes with special drifting tyres so you can drift round corners like a pro.

BALL BEARINGS
The car is fully ball raced meaning that the normal metal bearnings are upgraded to ball bearings which are smoother with less friction therefore making the car faster.

4WD DRIVE SYSTEM
This model has a 4 Wheel Drive system with a strong aluminium drive shaft evenly transferring the power from the rear to the front. The 4WD system gives better grip for better handling. These hobby grade RC cars also feature working front and rear differentials that further improves handling.

7.2v BATTERY
The special Tamiya type RC car battery is designed to pump out the power at a high rate making the model very fast with quick acceleration.

LARGE FOAM FRONT BUMPER
A strong over-sized front bumper will protect your car more in the event of a crash.

Free next day shipping

HSP VORTEX ELECTRIC RC BUGGY WITH UPGRADED 3500 MAH LIPO BATTERY

FEATURES

Ready to run.
The bodyshell uses PC material for more realistic appearance.
Splash proof electronics.
Transmitter uses the FS new 2.4G anti-runaway 4CH G4P standard.
Integrated screw-free chassis design.
Modern clean design with gears and electronics concealed and protected.
All ball bearings.
Front and rear differential boxes use metal gears and new sealed design.
5.8mm aluminum central metal driveshaft.
Steel main gear and fully sealed dust cover.
New aerodynamic streamlined moulded wing
Adjustable oil-pressure shock absorbers.
Shocks have dirt protectors and shock ball-end protection covers.
Front narrow wheels and rear wide wheels make the buggy faster and give better jump and all terrain ability.

SPECIFICATIONS

Power: Brushed
SKU: 94512
Drive: 4WD
Length: 40cm
Width: 24.5cm
Height: 23.5cm
Wheelbase: 28cm
Ground Clearance: 2.6cm
Wheels: 85x32mm (Front), 85x42mm (Rear)
Gear Ratio: 8.33:1
Weight: 1.7KG
Servo: 6KG
ESC: HW 60A
Motor: RC550-8517
Battery: 3500mAh Lithium
Control Distance: 110M
Box Size: 45.5×28.5×16.5cm

Free next day shipping

HSP OCTANE ELECTRIC RC MONSTER TRUCK – UPGRADED PRO BRUSHLESS VERSION

FEATURES

Pro version upgrade: Bigger 3800mAh lithium battery.
Pro version upgrade: 3300KV Brushless Motor.
Pro version upgrade: All-steel metal gears.
Pro version upgrade: #1144 high carbon steel front CVD driveshafts.
Pro version upgrade: The chassis is equipped with aluminium central upper brace for extra strength.
Ready to run.
The bodyshell uses PC material for more realistic appearance.
Splash proof electronics.
Transmitter uses the FS new 2.4G anti-runaway 4CH G4P standard.
Integrated screw-free chassis design.
Modern clean design with gears and electronics concealed and protected.
All ball bearing.
Front and rear adjustable links.
Front and rear differential boxes use steel gears and new anti-leakage design.
5.8mm aluminium central metal driveshaft.
Steel main gear with slipper protection and fully sealed dust cover.
Rear wheelie bar.
Metal and adjustable oil-pressure shock absorbers.
Shocks have dirt deflectors and shock ball-end protection cover.
85mm wheels with all-terrain 130mm tires.
High ground clearance for rugged terrains and higher/longer jumps.

SPECIFICATIONS

Power: Brushless
SKU: 94511PRO
Drive: 4WD
Length: 44cm
Width: 30cm
Height: 19cm
Wheelbase: 28cm
Ground Clearance: 4cm
Wheels: 130x52mm
Gear Ratio: 9.88:1
Weight: 2.35KG
Servo: 15KG
ESC: Brushless HW 60A
Motor: 3300KV Brushless Motor
Battery: 3800mAh 7.4v Lithium
Control Distance: 110M
Box Size: 52x35x21.5cm

FREE UK NEXT WORKING DAY DELIVERY

HSP VORTEX ELECTRIC RC BUGGY – UPGRADED PRO BRUSHLESS VERSION

FEATURES

Pro version upgrade: Bigger 3800mAh lithium battery.
Pro version upgrade: 3300KV Brushless Motor.
Pro version upgrade: All metal gears.
Pro version upgrade: #1144 high carbon steel front CVD driveshafts.
Pro version upgrade: The bodyshell is equipped with aluminium central buffer bar.
Ready to run.
The bodyshell uses PC material for more realistic appearance.
Splash proof electronics.
Transmitter uses the FS new 2.4G anti-runaway 4CH G4P standard.
Integrated screw-free chassis design.
Modern clean design with gears and electronics concealed and protected.
All ball bearings.
Front and rear adjustable links.
Front and rear differential boxes use metal gears and new sealed design.
5.8mm aluminium central metal driveshaft.
Steel main gear with anti-slipper buffer and fully sealed dust cover.
New aerodynamic streamlined moulded wing
Adjustable oil-pressure shock absorbers.
Shocks have dirt protectors and shock ball-end protection covers.
Front narrow wheels and rear wide wheels make the buggy faster and give better jump and all terrain ability.

SPECIFICATIONS

Power: Brushless
SKU: 94512PRO
Drive: 4WD
Length: 40cm
Width: 24.5cm
Height: 23.5cm
Wheelbase: 28cm
Ground Clearance: 2.6cm
Wheels: 85x32mm (Front), 85x42mm (Rear)
Gear Ratio: 8.33:1
Weight: 1.7KG
Servo: 6KG
ESC: Brushless HW 60A
Motor: 3300KV Brushless Motor
Battery: 3800mAh 7.4v Lithium
Control Distance: 110M
Box Size: 45.5×28.5×16.5cm

FREE UK NEXT WORKING DAY DELIVERY

Matrix models 1:43 Alvis 4.3 litre Vanden Plas Tourer ’38

The Alvis car company was founded in Britain, in 1919. Up until the 1960’s they were renowned for fast and sleek cars. They were essentially an auto engineering company, with the bodywork being designed by other companies, such as Cross and Ellis, and Tickford.

Matrix models are the car connoisseurs collectable. They are made of resin and in limited numbers. Moreover, they are very finely detailed using etched parts.