Modelling a “Run-Down” engine shed in plastic, Building plastic kits is more difficult than card kits. To get a realistic effect they need to be painted and weathered. The kit used for the diorama shown here is the Ex Airfix engine shed, now available from Dapol. This is an old kit that has warping problems and quite a lot of flash on the parts. However, it is cheap and makes a good project to practice your painting skills!
You can see the warpage problem on the roof, over the vents. This sad little shed has nor seen a lick of paint in many a year.
For the ,Modelling a “Run-Down” engine shed project, Look out for the Amazon product links in the text . This gives you an easy way to get the paint you need for this project. We also stock some of the items.
Where to start?
I usually start by painting the walls in the base colour. In this case Revell # 85 brown enamel. All the other paint used is acrylic. This brown will look a bit bright, but the weathering washes will tone this down. You need a good solid base coat and enamel will not react with the later water based washes.
Mortar technique and colour?
Let the base coat dry for at least 48 hours. it needs to set as you will be rubbing the mortar paint off later.
For mortar, I used a bottle of flesh coloured acrylic by Folkart, #949 skintone . This gives a pleasing effect and is not to bright. You get 59ml so it is great value. It needs to be thinned with a little water,so that it flows like milk
Paint the wash onto the walls,it should be thin enough to flow into the recesses. Leave it to dry for a couple of hours. Next, use a damp cloth or kitchen roll to rub of the excess from the bricks. The mortar does not need to be too neat.
Get your paint below. These are UK affiliate links, we receive a percentage of the items cost. This does not affect the price you pay.
Creating Weathered and worn paintwork.
The technique I use for creating weathered paintwork is quick and simple. Most of the woodwork for the engine shed was done with Vallejo Dark green acrylic.
This comes in little plastic bottles and is intended to be airbrushed. It is too thin to be used for hand painting, but makes a great wash. Brush liberally onto the plastic parts and it will collect in any recesses. Do this two or three times and you have old paintwork
Roof detailing a plastic kit
The roof in this kit was warped, you can straighten it out using a hair dryer to heat it up. Then press it under a heavy object, like a book. Give the roof parts a coat of FolkArt Gray acrylic. Next, when dry, dry brush some darker gray paint over the top of the slates. Finally, run a little thinned black paint so that it sits in the recesses between the slates.
Final detailing and bedding in.
One advantage of plastic kits is the detailing. This kit comes with drainpipes, lamps and a sign board. Paint these with Vallejo dark green. Paint the light up part of the lamps yellow.
Next ,make the base out of some 2mm grayboard. Fix the building down with UHU. Secondly run some white glue around the edges of the building and add some Javis Mid Green coarse grass scatter.
Thirdly, find an old piece of straight track and remove the joiners. Glue it down inside the shed with PVA. I used a wash of Vallejo dark earth to weather it. The lighter coloured grass is made with Javis meadow green scatter, or you can use one of their grass mats. The mats come in two widths and are great value.
That completes the project.
I write at least one new post a week, subscribe below so that you don’t miss any! You will receive an email with each new post.
See our other blog posts.
